D YEDEMC Mini-Pro 1310/1550nm SM Mulit-Function OTDR Tester, Built in OPM/OLS / RJ45 Test/VFL

Note:

1. Please make sure you are a professional before purchasing. Our products have been strictly tested before leaving the factory and will not be unusable. Due to the accuracy of the product, some scenarios cannot be used. You need to buy products with higher accuracy, not because our products have problems.

2. This Mini-OTDR can not test the live fiber, otherwise it may burn the instrument. The Dynamic Range is 24dB/22dB (can’t test splitter, if test the splitter, the Dynamic need more than 42dB). If test result is not accurate, pls using the Alcohol cotton to clean the fiber connector.

Main Interface

Turn on and enter the main menu. There are eight functional modules. Select module by pressing the direction keys, and then press the “OK” key to enter the corresponding functional interface.

Mini-Pro OTDR

Link quality and information can viewed. After the test is completed, Link information includes length, total loss and number of events. Detailed event information can be viewed from the event list.

iLOM(Event Map)

The function can be tested automatically by one key, and the information of the length of the link, the type of event point and the position of breakpoint can be displayed in a graphical form. The result is easy is clear and easy to understand.

OPM

This function is used to test the power of optical signal and insertion loss of various devices and optoelectronic components. It can identify and measure the frequency of 270/3301k/2kHz frequency optical signal.

VFL

Visible red light (650 nm) is injected into the optical fiber, and the position of the optical fiber fault point can be judged conveniently and accurately by observing the leakage position on the measured fiber. It is suitable for the detection of bare optical fibers, jumpers and other high loss sections caused by near-end faults and micro-bending of optical fibers and cables which can leak red light.

OLS

The wavelength of stabilized laser source is the same as OTDR wavelength. It is used to measure the parameters of telecommunication, CATV, LAN cable, insertion loss, isolation loss and echo loss of optical passive devices, and wavelength responsiveness of detectors.There are five modes of light source: CW,270 Hz, 330 Hz, 1 kHz and 2 kHz.

RJ45 Sequence

RJ45 line sequence measurement.

RJ45 Line Length & LineTracker

RJ45 Line tracking. Used for RJ45 cable length testing and wire tracker. After the line-finding function is activated, the cable being searched is touched by the distal end of the line-searching, and the sound of continuous “drops and drops” is heard.

System settings

Set up automatic shutdown, backlight brightness time, language, upgrade and other information.

Mini-Pro OTDR Technical Specifications:

• Wavelength: 1310nm/1550nm±20nm
• Fiber Type: G.652
• Dynamic Range: 24dB/22dB
• Event Blind Zone: 3m
• ATT Blind Zone: 8m
• Test Range: 5m~60km
• Pulse Width: 3ns~10us
• Ranging accuracy: ±(1m+ Sampling interval +0.005％×Test distance)
• Loss accuracy: ±0.05dB/dB
• Sampling Points: 16k~128k
• Sampling resolution: 0.05m~8m
• Reflection accuracy: ±3dB
• Data Storage: Internal：≥600；External：TF Card
• Laser Safety Level: Class Ⅱ
• File format: SOR Standard file format
• Connector: FC/UPC（Interchangeable SC、ST）

OPM

• Wave Range: 800nm~1700nm
• Interface Type: Universal Joint FC/SC/ST
• Test Range: -50dBm～+26dBm
• Uncertainty: ±5%
• Frequency Identification: CW/270/330/1k/2kHz
• Calibration wavelength: 850/980/1300/1310/1490/1550/1625/1650nm

Other Parameters:

• Display: 3.5 inch Color LCD
• Data Interface: Micro USB
• External storage: TF Card
• Power SupplyPolymer Li-Battery：3.7V, 4000mAh
• Adapter：5VDC，2A
• Battery Life: Standby＞20h；Measuring time＞12h
• Operating Temperature:-10℃～+50℃
• Storage Temperature: -40℃～+70℃
• Relative Humidity: 0～95％Non Condensing
• Size:173mm×82mm×37mm